PHIPPS & BIRD
WATER AND WASTEWATER TREATMENT PRODUCTS
|
PB-700
TM Standard Jar Tester |
|||||
|
This six-paddle model is our basic unit, incorporating all
of the most requested features. Constructed on a powder-coated steel
uniframe chassis, six stainless steel 1" x 3" paddles are spaced
six inches apart and are adjustable to a maximum depth of nine inches.
Our highly reliable electronic motor control system provides regulated
variable speeds of all paddles simultaneously, from 1 - 300 rpm, with
the exact speed clearly displayed on a digital readout. A fluorescent-lamp
floc illuminator is built into the jar tester base to provide soft,
diffused lighting of the samples being tested. All jar testers are
covered by a one-year manufacurer's warranty.
Each unit comes complete with a dustcover, and your choice of either:
All Phipps & Bird Jar Testers are available in either 120 V, 60 Hz or 220 V, 50/60 Hz models. |
||||
|
PB-750
TM & PB-950
TM Portable Jar Testers |
|||||
|
Like its six-paddle big brother, our PB-750
standard four-paddle model stands at the head of its
class. All the standard features of the six-paddle stirrer are included
with this unit as well. Choose either:
|
||||
|
The PB-950 is the unsurpassed four-paddle
version of our highly acclaimed programmable jar tester
. Functionally identical to the larger model, it comes complete
with everything from the operator-programmable memory banks to the
dustcover. Choose either:
Add the optional heavy-duty carrying/shipping case for ease of transport to multiple locations. |
|
B-KER
2®
Laboratory Jar |
|||||||||||
|
Now you can draw your jar test samples with a minimum of disturbance
to the settling floc. The B-KER 2
Laboratory Jar has a sampling port conveniently located
at the 10 cm settling-distance level. There's no need to raise
the Jar Tester paddles. Simply open the valve, and your sample is
gently drawn off.
The B-KER 2
Laboratory Jar:
|
||||||||||
| Column Filtration System | ||||||
|
The Phipps & Bird Column Filtration System (CFS) is
used to simulate the process of a direct-filtration water treatment
plant. It is an accessory piece of equipment for the Phipps &
Bird Jar Tester with
B-KER 2
Laboratory Jars (not included)
(not included).
After water samples are agitated through the flash and flocculation stages, the samples are allowed to gravity drain through filter columns, producing a simulated "clean" water test sample. A water line from the plant's service line can be connected to the device to backwash the filter columns when loading the granular media or when cleaning the media after a test procedure. The CFS consists of a number (4 or 6) of filter columns (2" ID clear PVC) and sets of valves to control the flow of water samples from the sample B-KER 2 Laboratory Jar s and to service water during the backwash process. All components are mounted on a portable rack with casters. The CFS mounted on the portable rack can be used in the lab or moved to a more convenient location within the treatment plant.
SPECIFICATIONS
Catalog No. 's: Four Place: 7810-100 Six Place: 7810-200 |
|||||
|
Crown Press
TM Belt Press Simulator |
|||||||||||
|
Now you can accurately simulate a full-size belt press,
duplicating the actual dewatering process, with the Crown Press
Belt Press Simulator.
The unique "crown" design allows the sludge cake to react as it would under normal operating conditions, including the effects of free water motion across both the top and bottom belt faces, shear, capillary channeling, sludge migration, response to pressure changes, and the effect on filtrate flow using different types of belt material. Without shutting down the big machines, the Crown Press Belt Press Simulator permits the operator to:
The Crown Press Belt Press Simulator comes complete with plow simulator, carrying case, and a comprehensive manual. Catalog No. 7800-200 |
||||||||||
|
Vacuum Filtration
Manifold |
|||||||||||||
|
Our vacuum filtration manifolds are ideally suited for performing
the procedures outlined in "Standard Methods for the Examination
of Water and Wastewater" (Solids/Residue Section) and other applications
where vacuum filtration is required. The Vacuum Filtration Manifold:
|
||||||||||||
|
Dissolved
Oxygen Sewage Sampler |
|||||||||||||||
|
Our Dissolved Oxygen Sewage Sampler collects two simultaneous
samples in accordance with A.P.H.A. specifications. This bucket-type
sampler is perfect for manual spot-sampling of water or wastewater at
depths down to five feet. The Dissolved Oxygen Sewage Sampler:
|
||||||||||||||
|
Groundwater
Sampler |
|||||||||
|
Take quick samples of liquids in recovery wells, storage tanks,
leachate monitoring wells, and drums with our Groundwater Sampler.
This baler-type sampler collects liquids at any depth greater than
three inches. The Groundwater Sampler:
|
||||||||
| Dipper-Type Sampler | |||||||||
|
Our Dipper-Type Sampler:
|
||||||||
|
IncuMate II
TM Incubation Control Module |
|||||
Highly reliable BOD
test results
|
Turn virtually any refrigerator into a laboratory
incubator with the IncuMate
II Incubation Control Module. It provides the consistently
reliable test results you require at a surprisingly affordable price.
Specially designed for use by smaller water and wastewater treatment facilities, the IncuMate lets you utilize a refrigerator to perform any incubation procedure requiring a temperature range of from 5° to 40°C, including: biochemical oxygen demand (BOD), trihalomethane formation potential (TFP), heterotrophic plate count (HPC), and Coliform. Just place the IncuMate unit on a wire shelf in a refrigerator, make the simple electrical plug-in connections, and turn it on. The IncuMate's built-in heater and circulating fan operate continuously to provide thorough air circulation at the desired temperature. At start-up or after the temperature control has been reset, the temperature will stabilize in about an hour. Monitor the temperature with a thermometer. For the smaller lab
that performs a nominal number of incubations each day, the IncuMate
II
Incubation Control Module is an economical alternative to
high-priced incubators.
Catalog No.'s: 120V: 7600-111 220V: 7600-112 |
||||
Dalco
International Home Page
|
|
Dalco Orthopedic Products
|
|
Phipps & Bird Water and Wastewater Treatment
Products
|
|
Phipps & Bird Physiology Experimentation Apparatus
|
|
Request
Additional Information
|
|
Contact Dalco
|
